231 INTERIOR LIGHTS | office lights table clamp can be used for table tops with a total thickness of 15-65 mm [incl. substructure] as required If part of the frame construction runs in the clamping area of the luminaire, the hard rubber buffers supplied must be used to compensate for the unevenness and create a flush clamping area. The universal design of the table clamp allows it to be mounted on almost all table tops. Universal table clamp Optional mounting kit For larger table tops or for free positioning on the table, the optional mounting kit can be used instead of the pre-installed table clamp. Dieser wird einfach durch ein Bohrloch im Tisch montiert. suitable for table tops with a total thickness of 15-35 mm suitable for hole diameters from 22-30 mm Switch on the light and dim to the desired brightness [this setting is saved by the daylight sensor as the default]. As soon as the ambient light changes, the sensor adjusts the brightness according to the stored standard [10% tolerance]. Daylight sensor High-precision radar presence detector The 24Ghz presence sensor recognises even the smallest movements on the desk - such as movements of the computer mouse - and switches the light on automatically. Faulty switch-offs are effectively prevented despite the short run-on time. Without movement, the brightness is reduced to 30% after 5*/15/30 minutes [*default setting]. If there is no movement, the light switches off after a further 5*/15/30 minutes [*default setting]. Brightness of direct and indirect light separately or synchronised, infinitely adjustable Direct and indirect light can be switched separately Continuously adjustable light colour [PRO models only] Adjustable run-on time of the presence sensor Touch panel
RkJQdWJsaXNoZXIy NTAzMzk=